Inserting and Removing the Battery
The battery compartment is located at the rear of the camera. Take care not to drop the battery as such impacts could reduce its ability to hold a charge.
Inserting the battery
Make sure the power switch is set to OFF. Align the battery with the leads, insert into the compartment and slide to the left. The battery should click in place.
Removing the battery
Make sure the power switch is set to OFF. To the left of the battery compartment, press and hold the BATT RELEASE button. Make sure you have a grip on the battery, slide it right and pull out.
Connecting to an AC Outlet
The AC Power Adaptor allows you to plug the camera into a wall outlet. Do not use any other AC adaptors except the one supplied in this kit. The AC Power Adaptor is plugged into the camera’s DC input terminal (DC IN) located at the rear of the camera on the bottom right. You will also find in this location the terminals for AV, Headphones, AUX and REMOTE.
Make sure the camera is switched OFF
Connect the AC cable to the AC adaptor
Connect the AC adaptor to the DC input terminal (DC IN)
Connect the AC cable to a wall outlet.
Disconnecting the AC from the camera
Make sure the camera is switched OFF. Unplug the AC cable from the wall outlet. Put it back in the camera bag nice and neat.